Mac's Custom Tie-Downs
If you want the ultimate protection available to transport your vehicle, then Mac's Custom Tie-Down Pro-Pack is available with either axle or wheel straps and gives a choice of end fitting on the ratchet strap. Pick the Pro-Pack that's right for you with either Twisted Snap Hooks or our Direct Hook Ratchet System.
Other products are listed below.
Pro-Pack with 24" Axle Straps
The 24" Pro Pack has four of our best selling ratchet straps and four axle straps that have been made 24" long to wrap around your axle or undercarriage.
Pro-Pack with 40" Wheel Straps
The 40" through-the-wheel Pro Pack has four of our best selling ratchet straps and four axle straps that have been made 40" long to accommodate today's larger wheel and tyre combinations.
To that we add 32" of padded fleece sleeve protectors so the only surface touching your nice wheels is a 3/8" foam pad... covered in soft black fleece. This is the most protective strap package on the market.
Rear Drag Nets with Direct Hook Ratchets (Pair)
A great way to haul cars with wide, sticky tyres!
Ideal for the rear of a dragster or open wheel single seater.
Nets are constructed with a twisted snap hook on the fixed end and a direct hook ratchet for tensioning.
Sold in pairs.
Wheel Net Assembly with Direct Hook Ratchet
Mac's wheel nets are made in a variety of styles and sizes.
Nets are based upon standard widths and ratios Featuring 12,000 lb. webbing with 3 stitched ribs for maximum durability.
SMALL... Fits most 13" and 14" tyres
MEDIUM... Fits most 15" and 16" tyres
LARGE... Fits most 16" and 17" tyres.
Tyre Block Strap
For those who need a "one size fits all" solution, we offer the Tyre Block Strap.
A set of 3 Tyre Blocks threaded onto a 2" strap.
Keep the strap from slipping off the tyre with the rubber teeth that bite into the tyre's grooves.
Ratchet Strap with Twist Snap Hooks
This 10,000 lb. rated all-purpose strap features twisted-snap hooks on both ends with a wide-handle ratchet.
Available in lengths of:
2" Combination Axle Ratchet Straps
Our most popular automotive tie-down.
This 10,000 lb. unit combines an axle strap and a ratchet strap into one assembly.
Features include: wide-handle ratchet, adjustable loop diameter, and full sleeve protector.
Available in lengths of:
Adjustable Tie-Back Strap (2" x 48")
This 10,000 lb. strap offers approximately 12" of adjustment by simply sliding the delta ring to the desired position.
Typically used in pairs on one end of the vehicle with ratchet straps used for tension on the other end.
Axle Straps
This 2" x 24" Axle Strap has seamless Delta rings on both ends and a full length, thick protective sleeve.
Ideal for versatile attachments utilizing hook-type ends.
10,000 lb. capacity.
Available in lengths of:
Versa Tie Track Kits
These kits make track installation a breeze. The track is already cut, drilled, and countersunk. We even provide stainless steel attachment hardware.
1 foot length kit contain:
2 foot kit contains:
4 foot kit contains:
Versa Tie Track 3
96" length
The wider contoured extrusion provides a smoother transition for surface mounted track.
Arrowhead for Versa Tie Track 3
The Arrowhead specially made for the Versa Tie Track 3 96 inch length.
Finish off your track section with our our billet aluminum arrowhead track ends.
Anchor Plate Assembly 4 Pack
Contains four anchor plate assemblies with 1/4" x 1.5 inch stainless machine screws.
This anchor plate and tie down ring kit allows for truly custom installation,and the ring can be pulled out when not in use, leaving a well-rounded, low-profile anchor plate that will not get in the way of other cargo.
Each ring is rated for a 2000 pound load.
Single Stud Tie Down Ring
This VersaTie™ connector has a cadmium plated alloy steel stud, anodized aluminum body and stainless steel ring for quick, secure one hand installation.
Ring rotates full 360 degrees.
Double Stud Tie Down Ring
For maximum strength loads, this fitting utilizes a dual stud connection and high strength stainless steel ring.
Excellent for vehicle tie-down applications.
Double Stud Idler Fitting
This fitting combines the same high strength forged body as the double stud ring with a 2" wide rectangular ring as a strap guide.
Double Stud Pear Shaped Ring
This fitting utilizes a "pear" ring that allows it to be pulled off at an angle from the track.
Ideal for applications where the track is installed close to obstructions such as cabinets, walls, etc.
Threaded Stud
This fitting provides a hand-tightened, rattle free track connection where quick release capability is not required.
Ideal for adjustable shelving, work benches, tools and equipment.
Used with track or the VT-1001 anchor plate.
4 Prong Knob
This moulded knob features a 3/8-24 threaded brass insert with a thru- hole.
This is just the ticket for quick release of brackets and components from the threaded stud.
Ideal for motorcycle wheel chock spreader bars.
Recessed 360 Swivel D-Ring
Heavy duty 6,000 lb. capacity swivel D-Ring offers 360° rotation for maximum tie-down convenience.
D-Ring lifts from recess for easy use. Zinc plated for corrosion resistance.
Also available in stainless steel.
Backing Plate for 360 Swivel D-Ring
Precision stamped from 1/4" thick steel.
This piece is a must to achieve the full capacity of the Recessed Swivel D-Ring.
A Mac's Original.
Bridle & Combo Bridle
These bridles work great for winching a car into or on board a trailer.
They feature 36" long legs and are available with either twisted snap hooks or combination loops.
2" Recovery Strap
These recovery straps feature premium quality USA made webbing, super-strong stitching and lined eyes for maximum durability.
Available in 20 & 30 foot lengths.
Fleece Sleeve Protector
The ultimate protection for fine finishes.
This sleeve features an integral piece of foam padding and a Velcro™ closure for attachment to 2" straps.
Available in 16 & 20 inch lengths.
Strap Wrap
A great method for keeping your straps tidy.
Also works well for garden hoses, air lines, etc.
More Information
If you require any information or prices in relation to the above items, please do not
hesitate to contact us.